If you need a number to start planning around, most small businesses spend somewhere between 0 dollars (free boards only) and roughly $200-$500 per role on sponsored placements for a standard SMB hire, scaling up for harder-to-fill or more senior positions. That range isn’t a rule; it’s a starting point to adjust based on the framework below, since a $500 ad spend on a role that’s easy to fill with free boards alone is wasted money, and the same amount on a specialized role that’s been open for a month might be too little.
Cost-Per-Hire Benchmarks to Anchor Your Budget
Before setting an ad-specific number, know the total cost-per-hire your business is realistically working against. SHRM’s benchmarking research puts the U.S. average at $4,700 to $5,475 for non-executive roles, with meaningful variation by seniority:
| Role level | Typical cost-per-hire |
|---|---|
| Entry-level | $1,500-$3,000 |
| Mid-level | $4,700-$8,000 |
| Senior/specialized | $10,000-$20,000 |
| Executive | $28,000-$36,000 |
These figures cover the full recruiting process, not just job ad spend: recruiter time, tools, agency fees where used, and advertising combined. Job advertising itself is typically a fraction of that total, but it’s the fraction you have the most direct, immediate control over, which is why it’s worth budgeting deliberately rather than defaulting to whatever a single job board charges.
A Simple Budget-Setting Framework
This is a suggested heuristic, not an external standard; adjust the percentages to your own hiring history once you have data to work from.
Step 1: Identify your target cost-per-hire for the role, using the table above as a starting benchmark if you don’t have your own historical number yet.
Step 2: Reserve roughly 10-20% of that figure specifically for paid job advertising (sponsored placements, boosted listings), separate from recruiter time, tools, or agency fees. For a mid-level role with a $5,500 target cost-per-hire, that’s a $550-$1,100 advertising line, not a total hiring budget.
Step 3: Start with free boards and add paid placement only where needed. Most distribution platforms include a baseline set of free boards (commonly Indeed organic, Google for Jobs, Glassdoor, Craigslist, and similar) at no cost. Reserve your paid budget for premium boards like LinkedIn or ZipRecruiter, and only activate them if free placement isn’t producing results within the first week or two.
Step 4: Reassess weekly, not just at the end of the posting. A listing that’s underperforming on one paid board after five to seven days is unlikely to suddenly recover; shifting that budget to a different board or increasing organic reach through your careers page and social channels is usually a better use of the remaining spend.
Free vs. Paid Spend: Where the Real Decision Is
Most job distribution software, including SmoothHiring’s Job Distribution Tool, separates boards into a free tier included in every plan and a paid tier you activate per role. That structure matters for budgeting because it means your actual spending decision isn’t “how much to spend on job advertising” in the abstract; it’s “which specific paid boards are worth activating for this specific role.”
A generalist role in a competitive local labor market (retail, hospitality, entry-level admin) often fills well on free boards alone, since those boards already have high organic traffic for common role types. A specialized or senior role competing for a narrower candidate pool is where paid, sponsored visibility on platforms like LinkedIn tends to earn its cost, since organic reach alone may not put the listing in front of enough qualified candidates.
How Season and Industry Change the Number
The framework above assumes fairly steady conditions, but two factors shift it in practice. The first is seasonality: retail, hospitality, and logistics roles get dramatically more competitive to advertise in the run-up to major holiday and back-to-school hiring windows, when many employers are posting similar roles at once and bidding up the cost of visibility on the same handful of paid boards. Posting the same role in a quieter hiring month can cost less to fill, which is worth factoring in if your hiring has any seasonal flexibility at all.
The second is industry-specific candidate scarcity. A skilled-trades or healthcare role in a market with a genuine labor shortage may need paid visibility even when the job itself is fairly standard, simply because the pool of available, qualified candidates is small regardless of how well the listing is written. In that situation, spending closer to the higher end of the 10-20% range from Step 2 above is usually justified, since the cost of an extended vacancy tends to outweigh the extra advertising spend.
Tracking Whether the Budget Worked
Setting a budget is only half the exercise; checking whether it worked closes the loop. After a role fills, look at three numbers: total applicants by source, cost-per-applicant on any paid boards you used, and how long the role took to fill compared to your usual time-to-fill for similar roles. If a paid board produced a high cost-per-applicant and a below-average share of your eventual candidate pool, that’s a signal to reduce or drop it next time rather than repeating the same allocation by default. Keeping even a simple spreadsheet of this by role type turns next year’s budget from a repeat guess into a decision grounded in your own hiring history, which is ultimately more useful than any external benchmark, including the ones in this guide.
Signals You’re Underspending or Overspending
You’re likely underspending if: the role has been posted for two or more weeks with minimal applicant volume, you’re only using free boards for a role that requires specialized or senior-level skills, or a competitor’s job ad research shows other employers in your space are sponsoring similar roles and you aren’t.
You’re likely overspending if: you’re sponsoring placements on multiple premium boards without checking which one is actually producing applicants, you’re paying for continued sponsorship on a board with a low or zero conversion rate for that role, or you’re applying the same paid budget to every role regardless of how easy or hard it’s historically been to fill.
The cost of underspending is often invisible but real. An open role costs roughly $500 a day in lost productivity, according to cost-per-hire research cited by both Recruiterflow and Pin’s benchmarking analysis. A modest paid placement that shortens time-to-fill by even a week can offset itself well before you’d notice it as a line item.
For a deeper look at whether the return justifies the spend at all, see how to measure job advertising ROI, which covers cost-per-applicant and cost-per-hire tracking in more detail. If low applicant volume is the immediate problem you’re trying to budget your way out of these 9 fixes are worth checking before increasing spend, since some causes of low response aren’t solved by a bigger budget.
Frequently Asked Questions
Is there a standard percentage of salary to spend on job advertising?
Is there a standard percentage of salary to spend on job advertising?
There’s no single accepted standard specific to advertising alone. A reasonable starting heuristic is reserving 10-20% of your target cost-per-hire for paid advertising specifically, then adjusting based on how a listing performs.
How much does the average job cost to fill in the US?
SHRM’s benchmarking research puts the national average at $4,700 to $5,475 for non-executive roles, covering the full recruiting process, not job ad spend alone. Executive roles average significantly more, often $28,000 or higher.
Should I spend more on job advertising for hard-to-fill roles?
Generally yes. Specialized and senior roles have a smaller qualified candidate pool, so paid, targeted visibility tends to deliver more value than it would for a high-volume, easy-to-fill role that already performs well on free boards.
What’s the cheapest way to advertise a job opening?
Free job boards (commonly Indeed organic listings, Google for Jobs, Glassdoor, and similar), a careers page, and employee referrals cost nothing per posting. These are worth exhausting before adding paid, sponsored placement for most standard roles.
How do I know if my job advertising budget is working?
Track applicant volume and cost-per-applicant by board, not just total applicants. A board producing high volume at a high cost per qualified applicant may be worse value than a lower-volume board with a better conversion rate.
Conclusion
Job advertising budgets work better as a framework than a fixed number: anchor to a realistic cost-per-hire target for the role’s level, reserve a defined percentage specifically for paid visibility, start with free boards, and reassess weekly rather than committing the full spend upfront. The $500-a-day cost of an empty seat is the number that should keep you from underspending on a role that genuinely isn’t getting visibility, just as watching per-board conversion should keep you from overspending on a board that isn’t converting.
See how SmoothHiring’s budget optimization automates the weekly reassessment step described above, shifting spend toward whichever board is actually converting for a given role.





